[2018 Upgraded Stereo] Bluetooth Headphones Neckband, DPRUI V4.2 Wireless Sports Headset Noise Canceling IPX7 Waterproof for Running/Gym with Mic (Black)

  • ♬ AMAZING BASS ♬: Dprui wireless sports earbuds DB-10 are equipped with high-grade shock-proof membrane and sounding unit, offering you perfect 4D stereo sound. The CVC 6.0 noise isolation technology reduces outside noises, enable clearer music and microphone sound.
  • ♬ BLUETOOTH V4.2 ♬: High-quality Bluetooth chip, faster transfer speed, higher security, more applicable. You can connect diverse devices but not at the same time.
  • ♬ LONGER BATTERY LIFE ♬: Up to 5 hours play time and 150 hours stand-by (fully charged) with a quick charge of only 2 hours. Special voice prompt function enables you to know using status right now.

Product Description

[2018 Upgraded Stereo] Bluetooth Headphones Neckband, DPRUI V4.2 Wireless Sports Headset Noise Canceling IPX7 Waterproof for Running/Gym with Mic (Black) : Product Description

So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Windows 8.1 / Windows 7 PC

  • Step 1 Select [Hardware and Sound] from [Control Panel] on your computer, and select [Devices and Printers].
  • Step 2 Select [Add Device] at the upper left to display the list screen of the device to be added.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 3 Set the headphones to the device registration mode (pairing mode).

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [〇〇 (headphone model name)] displayed on the [Add a Device] screen.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Check that the registered headphone model name is displayed on the [Devices and Printers] screen.

This completes the pairing process with the headphones.