[Black] M-beatz Sports True Wireless Headphones Bluetooth Earbuds with Microphone Wireless Earphones with Charging Box, Wireless Earbuds for iPhone,Samsung, Android

  • THE HIGHEST QUALITY THAT YOU DESERVE♫ – MagicBeatz specially designed to deliver clean and rich bass, clear high-fidelity sound without lag with active noise cancellation, creating a remarkable experience of listening to your favorite music.The built-in high-quality sound chip CSR From Japan provides you with the perfect high & low sound frequencies. Two piece interconnection creates a special stereo & super deep bass surrounding sound
  • Technology with voice notification of incoming calls. High dynamic range built-in microphone to make calls, with buttons on the earbuds allows you to Play/Pause on your favorite music tracks as well as Answer/Reject phone call without reaching your phone. It is making easier to you to handle your calls while driving. Our earbuds are compatible with hundreds of different mobile phone brands.The first wireless earphones that satisfy all your needs.
  • (Length 3.2 Inch * Width 2.2 Inch * Height 0.9 Inch) The battery capacity is 1500 mAh. Charging box can be used as a charger or simply as a container for your earbuds. The charging time earbuds within 2 hours, working time 4 hours and 30 minutes, and standby time over 120 hours. It offers up to 12 times charge cycles to extend your music playback time. Easily recharge earbuds by placing them in the charging case.

Product Description

[Black] M-beatz Sports True Wireless Headphones Bluetooth Earbuds with Microphone Wireless Earphones with Charging Box, Wireless Earbuds for iPhone,Samsung, Android : Product Description



What is the communication distance of Bluetooth?

Bluetooth has the concept of “Class.” Even with the same Bluetooth product, the strength of the radio wave differs depending on the class that is certified. That is, the communicable distance also changes.

Before you buy a Bluetooth product, make sure that you have the required class before purchasing so that it does not say, “The radio wave did not reach …”. There are three types of Classes 1-3.

Types of Bluetooth communication distance and communicable distance

One thing to keep in mind when choosing a product is that Class 1 devices do not always reach the maximum communication distance of 100m. For example, earphones with a communication distance of 20 m and microphones with a range of 50 m are also classified in Class 1. In other words, if the maximum output is “more than Class2 and within 100mW”, they are all equally classified into Class1.

As described above, even if the products are of the same class, the communication distance varies. If you want to focus on range, check the maximum output for each product.

Also, the intensity of radio waves that can be output differs depending on the country or region where the device is used. The upper limit is about 50 mW under the Japanese Radio Law, but not overseas. Besides, keep in mind that the distance may fluctuate depending on the performance of the receiving antenna and power amplifier, so it cannot be measured unconditionally.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Windows 8.1 / Windows 7 PC

  • Step 1 Select [Hardware and Sound] from [Control Panel] on your computer, and select [Devices and Printers].
  • Step 2 Select [Add Device] at the upper left to display the list screen of the device to be added.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 3 Set the headphones to the device registration mode (pairing mode).

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [〇〇 (headphone model name)] displayed on the [Add a Device] screen.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Check that the registered headphone model name is displayed on the [Devices and Printers] screen.

This completes the pairing process with the headphones.