OUYAWEI G02 TWS 5.0 Bluetooth 9D Stereo Earphone Wireless Earphones IPX7 Waterproof Earphones 3300mAh LED Smart Power Bank Case

  • IPX7 Waterproof.
  • 3300mAh large capacity of charging box,can Charge the phone.
  • With LED Power Display of the charging box.

Product Description

OUYAWEI G02 TWS 5.0 Bluetooth 9D Stereo Earphone Wireless Earphones IPX7 Waterproof Earphones 3300mAh LED Smart Power Bank Case : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

Actual Bluetooth connection procedure

step 1:
Turn on Bluetooth on the player side (transmitting side).

For iPhone

* The following image is a screenshot of my iPhone.

  • (1) Open the settings.
    First, open the setting screen. Bluetooth is [Off] in the image. Tap here!
  • (2) Tap Bluetooth in the settings.
    Bluetooth on / off switching button. The white color is off!
  • (3) Turn on Bluetooth.

※iPhone6S! The appearance may be slightly different depending on the version!

Step 2:
Please turn on the power of the earphone (receiving side) and set it to the pairing mode.

Pairing, i.e., connection mode! This process tends to stumble. It’s not the end after turning on the power. For most devices, the pairing mode is often set by pressing and holding the power button from power-off until the lamp flashes red and blue. Light or not, there are various and Tari a button of the playback is stopped, not the power switch, but generally is long press from the time of power supply OFF is!

Step 3:
Select the model of the earphone (reception side) on the player side (transmission side).

For iPhone

  • (1) Find the device you want to pair.
    After pairing the earphones and headphones, check the setting screen on the player again! The name of the paired device will be searched!
  • (2) Tap the device name.
    Tap the name of the device to complete the connection! [Connected] is displayed!

※ iPhone6S! The appearance may be slightly different depending on the version!

One point advice ☆
In many cases, the connection after the first time skips the pairing process in step 2 and connects the transmitter and receiver. If you can’t connect, try pairing again!

Pair with Mac (macOS) PC

  • step 1 Apple menu select [System Preferences] from the [ ] menu on the computer
  • Step 2 Select [Bluetooth]
  • Step 3 Set the headphones to the device registration mode (pairing mode).

Check that the main unit lamp blinks blue and red alternately, or that blue blinks twice consecutively.

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select the [Connect] button to the right of [〇〇 (headphone model name)] displayed in the [Device] field.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Confirm that “Connected” is displayed under the headphone model name.

This completes the pairing process with the headphones.