USB Type C Headphone, dyplay Active Noise Cancelling Earbuds in-Ear USB C Headphones with ANC, MEMS Mic & DAC Chip, Hi-Fi Stereo Wired Earphones for Android, iPad Pro 2018, Huawei, Google Devices, HTC

  • 【Active Noise Cancelling】 ANC technology greatly reduced unwanted surrounding noise by up to 25dB, upgrade your music listening experience at office, travel, party, metro, bus and airport, without compromising audio quality.
  • 【Get Sound & Quality】USB Type-C plug with ⌀12 mm dynamic drivers & high-performance diaphragms to achieve crisp treble, natural alto & deep bass.Supports up to 96 kHz sampling rate and powers CD quality sound performance. Built-in DAC chip contacts ensure the cleanest sound experience possible.
  • 【Widely Compatibility】dyplay USB C headphones Compatible with iPad Pro 2018/9, MacBook/Air/Pro, Windows 10 laptops, and Android phones such as Google Pixel 2/2XL, Pixel 3/3XL, Pixel 4/4XL, Samsung Galaxy S9/S10/S10+, Samsung Galaxy Note 10/Note 10 Plus, Google Chromebook, Xiaomi, HUAWEI Mate 10 Pro/P20, Mate 20/Pro, P30/Mate 30. For HTC 10 & U11, Essential PH-1, Razer Phone. (Note: restart devices to try again if no sound come out)

Product Description

USB Type C Headphone, dyplay Active Noise Cancelling Earbuds in-Ear USB C Headphones with ANC, MEMS Mic & DAC Chip, Hi-Fi Stereo Wired Earphones for Android, iPad Pro 2018, Huawei, Google Devices, HTC : Product Description



What is the communication distance of Bluetooth?

Bluetooth has the concept of “Class.” Even with the same Bluetooth product, the strength of the radio wave differs depending on the class that is certified. That is, the communicable distance also changes.

Before you buy a Bluetooth product, make sure that you have the required class before purchasing so that it does not say, “The radio wave did not reach …”. There are three types of Classes 1-3.

Types of Bluetooth communication distance and communicable distance

One thing to keep in mind when choosing a product is that Class 1 devices do not always reach the maximum communication distance of 100m. For example, earphones with a communication distance of 20 m and microphones with a range of 50 m are also classified in Class 1. In other words, if the maximum output is “more than Class2 and within 100mW”, they are all equally classified into Class1.

As described above, even if the products are of the same class, the communication distance varies. If you want to focus on range, check the maximum output for each product.

Also, the intensity of radio waves that can be output differs depending on the country or region where the device is used. The upper limit is about 50 mW under the Japanese Radio Law, but not overseas. Besides, keep in mind that the distance may fluctuate depending on the performance of the receiving antenna and power amplifier, so it cannot be measured unconditionally.

Connect headphones directly to your Bluetooth device.

Turn on the headphones and press and hold the Power / Bluetooth button until the Bluetooth light flashes blue. You will hear a prompt saying, “Another device is ready to connect” (if voice guidance is enabled). If the headphones are turned on for the first time, the headphones are already in this state.

The power button on the headphones
Turn on Bluetooth on the connected device (smartphone, tablet, etc.)

In your device’s Bluetooth settings menu, select your headphones. If your headphones do not appear in the list, you will need to tap “Search,” “Scan,” “Pair new device,” etc. in the Bluetooth menu of the device There maybe.

When connected, you will hear an audio prompt saying, “Connected to <device name>.”

Procedure to connect Bluetooth earphone with Windows PC

1. Start pairing
First, operate the buttons on the Bluetooth earphone side to start matching.

The operation method differs depending on the earphone or speaker, so check the manual.

* Playing and stopping, power and volume are nothing, but you may start pairing by pressing and holding a relevant button.

2. Add device
Open “Devices and Printers” in Control Panel, and click “Add Device.”

Many people drop out without finding this. Now, click on this to start searching for devices.

When the Bluetooth earphone is detected automatically, the device installation will begin.

Windows now recognize the Bluetooth earphone as a playback device.

3. Priority output for Bluetooth earphones
However, with this alone, you will not be able to hear the sound from the Bluetooth earphone. As before, you will get out of the speaker.

This is because the speaker you have been using has priority over Bluetooth as the output destination.

Go to “Control Panel”-> “Sound,” right-click the icon that says “Bluetooth Audio Device,” and try “Set as Default Device.”

About behavior
With this setting, the sound of the Windows PC will be played from the Bluetooth earphone, but no sound will be output from the speaker.

Here, when you turn off the Bluetooth earphone, it automatically switches to output from the speaker.

Also, when you turn on the Bluetooth earphone again, the output to the Bluetooth earphone has priority still, and the sound output from the speaker stops.