adidas RPT-01 Bluetooth Sport On-Ear Headphones – New, Night Grey, 2.8 x 5.6 x 7.5 Inches

  • Make sure this fits by entering your model number.
  • Sweat proof & Water resistant (IPX4)
  • Up to 40 hours of playtime

Product Description

adidas RPT-01 Bluetooth Sport On-Ear Headphones – New, Night Grey, 2.8 x 5.6 x 7.5 Inches : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

Connect headphones directly to your Bluetooth device.

Turn on the headphones and press and hold the Power / Bluetooth button until the Bluetooth light flashes blue. You will hear a prompt saying, “Another device is ready to connect” (if voice guidance is enabled). If the headphones are turned on for the first time, the headphones are already in this state.

The power button on the headphones
Turn on Bluetooth on the connected device (smartphone, tablet, etc.)

In your device’s Bluetooth settings menu, select your headphones. If your headphones do not appear in the list, you will need to tap “Search,” “Scan,” “Pair new device,” etc. in the Bluetooth menu of the device There maybe.

When connected, you will hear an audio prompt saying, “Connected to <device name>.”

Pair with Windows 10 PC

  • Step 1 Select Action Center at the right end of the taskbar on your computer and select [All Settings].

*The setting screen differs depending on the OS version.

  • Step 2 When the [Settings] screen opens, select [Devices].
  • Step 3 Set the headphones to the device registration mode (pairing mode).
    Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
    There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [Bluetooth and other devices] on the computer, and select the [Add Bluetooth or other devices] button.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 5 When the [Add a device] screen is displayed, select [Bluetooth].
  • Step 6 When [〇〇 (headphone model name)] is displayed, select it.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 7 Confirm that “Connected to music” is displayed under the headphone model name, and select [Done].

This completes the pairing process with the headphones.