Beats Solo3 Wireless On-Ear Headphones – Rose Gold (Renewed)

  • DRIVEN BY THE APPLE W1 CHIP: Incorporating the efficient W1 chip brings seamless setup and switching for your Apple devices, up to 40 hours of battery life, and Fast Fuel technology for 3 hours of play with a 5-minute charge
  • FEEL YOUR MUSIC: At the heart of Beats Solo3 Wireless is award-winning Beats sound. This headphone delivers premium playback with fine-tuned acoustics that maximize clarity, breadth, and balance
  • ALL-DAY PLAY: Beats Solo3 Wireless delivers up to 40 hours of battery life driven by the efficiency of the Apple W1 chip. Integrated on-ear controls coupled with dual beam-forming mics allow you to take calls, play music, adjust volume, and activate Siri while on the go

Product Description

Beats Solo3 Wireless On-Ear Headphones – Rose Gold (Renewed) : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Mac (macOS) PC

  • step 1 Apple menu select [System Preferences] from the [ ] menu on the computer
  • Step 2 Select [Bluetooth]
  • Step 3 Set the headphones to the device registration mode (pairing mode).

Check that the main unit lamp blinks blue and red alternately, or that blue blinks twice consecutively.

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select the [Connect] button to the right of [〇〇 (headphone model name)] displayed in the [Device] field.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Confirm that “Connected” is displayed under the headphone model name.

This completes the pairing process with the headphones.