Phiaton Black BT 390 On Ear Hi-Fi Stereo Wireless Bluetooth Headphones, Foldable, EverPlay-X Wireless Headset (30 Hours Play Time) with Deep Bass Stereo and Mic

  • Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
  • Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at fcc.gov/cgb/wirelessmicrophones.

Product Description

Phiaton Black BT 390 On Ear Hi-Fi Stereo Wireless Bluetooth Headphones, Foldable, EverPlay-X Wireless Headset (30 Hours Play Time) with Deep Bass Stereo and Mic : Product Description



What is the communication distance of Bluetooth?

Bluetooth has the concept of “Class.” Even with the same Bluetooth product, the strength of the radio wave differs depending on the class that is certified. That is, the communicable distance also changes.

Before you buy a Bluetooth product, make sure that you have the required class before purchasing so that it does not say, “The radio wave did not reach …”. There are three types of Classes 1-3.

Types of Bluetooth communication distance and communicable distance

One thing to keep in mind when choosing a product is that Class 1 devices do not always reach the maximum communication distance of 100m. For example, earphones with a communication distance of 20 m and microphones with a range of 50 m are also classified in Class 1. In other words, if the maximum output is “more than Class2 and within 100mW”, they are all equally classified into Class1.

As described above, even if the products are of the same class, the communication distance varies. If you want to focus on range, check the maximum output for each product.

Also, the intensity of radio waves that can be output differs depending on the country or region where the device is used. The upper limit is about 50 mW under the Japanese Radio Law, but not overseas. Besides, keep in mind that the distance may fluctuate depending on the performance of the receiving antenna and power amplifier, so it cannot be measured unconditionally.

Connect headphones directly to your Bluetooth device.

Turn on the headphones and press and hold the Power / Bluetooth button until the Bluetooth light flashes blue. You will hear a prompt saying, “Another device is ready to connect” (if voice guidance is enabled). If the headphones are turned on for the first time, the headphones are already in this state.

The power button on the headphones
Turn on Bluetooth on the connected device (smartphone, tablet, etc.)

In your device’s Bluetooth settings menu, select your headphones. If your headphones do not appear in the list, you will need to tap “Search,” “Scan,” “Pair new device,” etc. in the Bluetooth menu of the device There maybe.

When connected, you will hear an audio prompt saying, “Connected to <device name>.”

How to connect (pair) a Bluetooth earphone with a computer

For Windows

First, how to connect a PC to Bluetooth earphones is explained for Windows 10. The steps are as follows:

1. Click the “Start button” and go to “Settings”-> “Devices.”

2. Select the item “Bluetooth” on the left side of the device screen. Then the search for surrounding Bluetooth devices starts.

3. Put the Bluetooth earphone in pairing mode. Refer to the Bluetooth earphone manual for the pairing mode.

4. When an earphone is detected, the name of the headset is displayed. After a while, pairing is ready, and the button “Pairing” will appear. Click it.

5. You may be asked to enter your passcode or PIN code. In that case, follow the instructions and enter the system using the keyboard.

6. After that, when “Connected” is displayed, pairing is completed.

For macOS

1. Click “System Preferences” from the Apple menu and go to “System Preferences.”

2. From the System Preferences screen, select the item “Bluetooth.” Then it will be in the mode to search for nearby Bluetooth devices. If “Bluetooth: Off” is displayed, click “Turn on Bluetooth.”

3. Put the Bluetooth earphone in pairing mode. Refer to the Bluetooth earphone manual for the pairing mode.

4. When an earphone is detected, the name of the headset is displayed. Click the “Pair” or “Connect” button next to it.

5. You may be asked to enter your passcode or PIN code. In that case, follow the instructions and enter the system using the keyboard.

6. After that, when “Connected” is displayed, pairing is completed.