AN S/2 Wireless Earbuds Bluetooth Headphone Sport in-Ear IPX 4 Sweatproof Earphones with Mic (Super Sound Quality Bluetooth 4.1,3-10 Hours Play Time) Yellow/Black

  • 1. Using UV bright light technology surface, which is not easy to scratch, and easy to clean.
  • 2. The main body thickness only 8.9 mm, build in famous Brand from United Kingdom CSR Bluetooth Chip, Support Bluetooth V4.0 standard, 10m connected distance. Whether indoors or outdoors, enjoy music everywhere.
  • 3. Compact body for Waterproof IPX4, to protect water splashing in all directions, But also to prevent the erosion of sweat. Let you have great music experience when dig the same time.

Product Description

AN S/2 Wireless Earbuds Bluetooth Headphone Sport in-Ear IPX 4 Sweatproof Earphones with Mic (Super Sound Quality Bluetooth 4.1,3-10 Hours Play Time) Yellow/Black : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

Actual Bluetooth connection procedure

step 1:
Turn on Bluetooth on the player side (transmitting side).

For iPhone

* The following image is a screenshot of my iPhone.

  • (1) Open the settings.
    First, open the setting screen. Bluetooth is [Off] in the image. Tap here!
  • (2) Tap Bluetooth in the settings.
    Bluetooth on / off switching button. The white color is off!
  • (3) Turn on Bluetooth.

※iPhone6S! The appearance may be slightly different depending on the version!

Step 2:
Please turn on the power of the earphone (receiving side) and set it to the pairing mode.

Pairing, i.e., connection mode! This process tends to stumble. It’s not the end after turning on the power. For most devices, the pairing mode is often set by pressing and holding the power button from power-off until the lamp flashes red and blue. Light or not, there are various and Tari a button of the playback is stopped, not the power switch, but generally is long press from the time of power supply OFF is!

Step 3:
Select the model of the earphone (reception side) on the player side (transmission side).

For iPhone

  • (1) Find the device you want to pair.
    After pairing the earphones and headphones, check the setting screen on the player again! The name of the paired device will be searched!
  • (2) Tap the device name.
    Tap the name of the device to complete the connection! [Connected] is displayed!

※ iPhone6S! The appearance may be slightly different depending on the version!

One point advice ☆
In many cases, the connection after the first time skips the pairing process in step 2 and connects the transmitter and receiver. If you can’t connect, try pairing again!

Pair with Windows 8.1 / Windows 7 PC

  • Step 1 Select [Hardware and Sound] from [Control Panel] on your computer, and select [Devices and Printers].
  • Step 2 Select [Add Device] at the upper left to display the list screen of the device to be added.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 3 Set the headphones to the device registration mode (pairing mode).

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [〇〇 (headphone model name)] displayed on the [Add a Device] screen.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Check that the registered headphone model name is displayed on the [Devices and Printers] screen.

This completes the pairing process with the headphones.