Anker Soundcore Life Q10 Wireless Bluetooth Headphones, Over Ear and Foldable, Hi-Res Certified Sound, 60-Hour Playtime and Fast USB-C Charging, Deep Bass, Aux Input

  • Hi-res certified sound The Hi-Res logo is a of exceptional audio quality awarded only to audio devices capable of producing the most accurate representation of what the artist intended Unlike ordinary headphones life Q10 delivers sound up to 40 KHz for the richest listening experience
  • Bassup our exclusive BASSUP technology analyzes your Audio’s low frequencies in real-time and instantly increases the Bass Combined with oversized 40mm dynamic drivers bass power is boosted up to 100% a button on the right earcup of the wireless over ear headphones activates BASSUP
  • 60-Hour playtime an advanced Bluetooth chip with reduced power draw combines with anker’s world-renowned power technology to offer enormous playtime even for wireless over ear headphones Listen for 2 hours a day for an entire month

Product Description

Anker Soundcore Life Q10 Wireless Bluetooth Headphones, Over Ear and Foldable, Hi-Res Certified Sound, 60-Hour Playtime and Fast USB-C Charging, Deep Bass, Aux Input : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

How to pair Bluetooth headphones (Android / iOS)

  • step 1 Put the headphones in device registration mode (pairing mode)

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 2 Turn on the Bluetooth of the smartphone or tablet you want to connect

For Android
Select [Settings]-[Wireless & Networks]-[Bluetooth].
For iOS
Select [Settings]-[Bluetooth]

  • Step 3 Touch the displayed headphone model name on the smartphone or tablet screen.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

The pairing is completed.

How to connect (pair) a Bluetooth earphone with a computer

For Windows

First, how to connect a PC to Bluetooth earphones is explained for Windows 10. The steps are as follows:

1. Click the “Start button” and go to “Settings”-> “Devices.”

2. Select the item “Bluetooth” on the left side of the device screen. Then the search for surrounding Bluetooth devices starts.

3. Put the Bluetooth earphone in pairing mode. Refer to the Bluetooth earphone manual for the pairing mode.

4. When an earphone is detected, the name of the headset is displayed. After a while, pairing is ready, and the button “Pairing” will appear. Click it.

5. You may be asked to enter your passcode or PIN code. In that case, follow the instructions and enter the system using the keyboard.

6. After that, when “Connected” is displayed, pairing is completed.

For macOS

1. Click “System Preferences” from the Apple menu and go to “System Preferences.”

2. From the System Preferences screen, select the item “Bluetooth.” Then it will be in the mode to search for nearby Bluetooth devices. If “Bluetooth: Off” is displayed, click “Turn on Bluetooth.”

3. Put the Bluetooth earphone in pairing mode. Refer to the Bluetooth earphone manual for the pairing mode.

4. When an earphone is detected, the name of the headset is displayed. Click the “Pair” or “Connect” button next to it.

5. You may be asked to enter your passcode or PIN code. In that case, follow the instructions and enter the system using the keyboard.

6. After that, when “Connected” is displayed, pairing is completed.