Bluedio T6S Bluetooth Headphones Over Ear with Mic, Active Noise Canceling Headset Voice Control Support Amazon Web Services (AWS), Wireless Headphones for Cell Phone/PC, 32-Hrs Play Time, Red

  • NOTE: Original Bluedio T6S sold by “Bluedio”. Infrared smart sersor can be turned off via Bluedio App.【TECHNOLOGY UPGRADING & Super DYNAMIC SOUND EFFECT】T6S Bluetooth Headphones upgrade the Bluetooth chip toTM2327, instead of the Max 97220 of T6, better control the musicality for music is more dynamic and flexible by this technology, better taste your music.
  • 【4 MIC ACTIVE NOISE CANCELLING + 57mm PROPRIETARY DRIVERS】Four built-in mini microphones sample and collect the ambient noise spectrum and then send the noise signal to ANC loop for reversal processing. T6S Bluetooth headsets adopt the Active Noise Cancelling technology and bring you crystal-clear sound. T6S Turbine series adopt 57mm Fully Plating Titanium Drive Units, combining with its own developed VFT (Vector Flow Supercharging Technology), which makes the sound steady and impressive.
  • 【HUMANIZED INFRARED SMART SENSOR & COMFORTABLE EAR CUP】—- Bluedio T6S adopt professionally customized and developed light and the infrared sensor. When you put down your earphones, the music will pause; when you wear them, the music will continue. The humanized design will make you fall in love with music and the earphones. A pair of rotating ear cup is comfortable to wear with anti-ear pad design. It is convenient to take the headphones outsides with pads flat in your bag/suitcase/trunk,etc.

Product Description

Bluedio T6S Bluetooth Headphones Over Ear with Mic, Active Noise Canceling Headset Voice Control Support Amazon Web Services (AWS), Wireless Headphones for Cell Phone/PC, 32-Hrs Play Time, Red : Product Description



What is “Bluetooth”?

Wireless communication technology for exchanging data communication between digital devices over short distances.

In other words, in a more familiar sense, the “thing” that connects the remote control for operation with the radio control unit is the image of Bluetooth. Wireless technology that can be operated without wires.

You set up and use a method called “pairing” between your Bluetooth product and your smartphone.

The pair is “Pair,” which means “two things become one.
It is the same meaning as that pair that is said to be a pair of two at the time of the athletic meet.

How Bluetooth headphones connect to a smartphone?

Most wireless headphones use Bluetooth to communicate with the device, and in some cases, there may be a problem with the connection between the mobile app and the headphones.
If you are using wireless headphones with your mobile device, make sure your mobile device OS and headphone app are up to date.

Earphone-type wireless headphones are more susceptible to connection issues, such as broken connections, out-of-sync, and dropped calls than other wireless headphones due to their form.
In some cases, when communication is lost, your head itself is blocking the signal, which can be challenging to resolve.

Some headphone manufacturers say that updating the firmware may improve synchronization and other issues, but not all headphones.
Nevertheless, there may be solutions on the manufacturer’s website, including firmware updates, so you should check them out.

Of course, you need to keep your firmware up to date.

Pair with Windows 10 PC

  • Step 1 Select Action Center at the right end of the taskbar on your computer and select [All Settings].

*The setting screen differs depending on the OS version.

  • Step 2 When the [Settings] screen opens, select [Devices].
  • Step 3 Set the headphones to the device registration mode (pairing mode).
    Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
    There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [Bluetooth and other devices] on the computer, and select the [Add Bluetooth or other devices] button.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 5 When the [Add a device] screen is displayed, select [Bluetooth].
  • Step 6 When [〇〇 (headphone model name)] is displayed, select it.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 7 Confirm that “Connected to music” is displayed under the headphone model name, and select [Done].

This completes the pairing process with the headphones.