Hybrid Active Noise Cancelling Headphones with Touch Control, AKSONIC Bluetooth Over Ear Stereo HiFi Headset with Microphone & Proximity Sensor, aptX LL, Comfortable Earpads for Work Travel Flight

  • [Hybrid Active Noise Cancellation] Significantly reduce 98% of the ambient noise under 36dB. The Hybrid Active Noise Cancellation is a newer generation of ANC technology that comes with the Feed-forwad and Feedback configuration, it eliminates unwanted sound and reduce the distortion produced by the acoustic feedback to perform immersive sound with well-balanced highs, precise mids, and powerful bass.
  • [Smart Sensors] Built-in with the proximity sensor and touch control for intuitive controls. The proximity sensor works to detect and automatically control ON/OFF when wearing & taking off the headphones. The touch panel works for ON/OFF control, volume adjustment and switching songs. AKSONIC Headphones comes with Bluetooth mode, ANC mode and transparency mode.
  • [Seamless Connection] Bluetooth V5.0 connection for better music streaming and improved wireless range. AKSONIC Hybrid ANC Headphones has been built upon Qualcomm CSR8675 chipset and 40mm dynamic drivers that conveys high fidelity sound effect. Supported Codec includes aptX, aptX Low Latency, AAC, SBC.

Product Description

Hybrid Active Noise Cancelling Headphones with Touch Control, AKSONIC Bluetooth Over Ear Stereo HiFi Headset with Microphone & Proximity Sensor, aptX LL, Comfortable Earpads for Work Travel Flight : Product Description



What are the advantages of Bluetooth earphones?

  1. The cable does not get tangled, and there is little worry about disconnection
    The most significant difference between wired earphones and Bluetooth earphones is that Bluetooth earphones do not have cables entangled due to wireless connection. There’s no cable entanglement, so you won’t be bothered or disturbed when you’re playing sports. Also, if you put earphones in your bag, if you push them out on a crowded train and try to take them out, it will be hard to get tangled at the bottom … it will not be difficult. Furthermore, since there is little worry about disconnection, it is recommended for those who are in trouble because they frequently disconnect their earphones.
  2. Listen to music even when away from your smartphone
    With Bluetooth earphones, you can enjoy music, for example, while charging your smartphone in the corner of a room, near an electrical outlet, or on your sofa.
    There are other benefits besides music, such as placing a smartphone at the table and talking with friends hands-free while doing housework.
  3. When listening to your favorite music, has the earphone cable rubbed against your clothes and made a sound such as “roughness” (= touch noise) that made you feel uncomfortable? Bluetooth earphones do not have to worry about wireless connection. You can enjoy music to your heart’s content.

On the contrary, what are the disadvantages of Bluetooth earphones?

  1. Need to charge earphones every day
    The maximum usage time of Bluetooth earphones is generally between 3 hours and 5 hours (some models have 7-8 hours). Unlike wired headsets, you can’t use it if it runs out of power, so you need to charge it every day. Also, communication may become unstable if the charge is low.
  2. Sound quality may be lower than wired earphones
    Compared to wired headsets, due to differences incompatible audio compression method (codec), communication speed, communication distance, etc., between the smartphone that sends music and the Bluetooth earphone that plays music, Sound quality may be degraded. That said, the sound quality is almost the same as inexpensive wired earphones, so it is a quality that does not matter to those who are not particular about sound quality. Besides, high-quality LDAC and Bluetooth earphones compatible with apps have also appeared in recent years, so if you are concerned about the deterioration in sound quality, you should select a high-quality sound.
  3. Rare sound skips and skips
    Since radio waves are used for communication, there may be cases where the sound is skipped in places where wireless communication flies, such as when connected to multiple devices at the same time, or when traveling at an urban station with many people. Also, a delay may occur when transmitting and receiving sound between the terminal and the earphones; for example, a gap may occur between the game screen and the music. You will need to be especially careful when playing games called sound games.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Windows 8.1 / Windows 7 PC

  • Step 1 Select [Hardware and Sound] from [Control Panel] on your computer, and select [Devices and Printers].
  • Step 2 Select [Add Device] at the upper left to display the list screen of the device to be added.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 3 Set the headphones to the device registration mode (pairing mode).

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [〇〇 (headphone model name)] displayed on the [Add a Device] screen.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Check that the registered headphone model name is displayed on the [Devices and Printers] screen.

This completes the pairing process with the headphones.