Mpow (Series II) Active Noise Cancelling Headphones, 50 Hours Playtime with Hi-Fi Deep Bass, ANC Over Ear Bluetooth Headphones with Mic, Foldable Wireless Headset for Travel Work TV Cell Phone/PC

  • Make sure this fits by entering your model number.
  • Active noise cancelling (ANC) — effectively reduces continuous low frequency noise like airplane cabin noise, traffic noise, metro noise and more. While inconsistent or sudden bursts of sound, car Horn, conversations are usually unaffected. Enable you to enjoy clean music on noisy airplane, subway and in busy crowd.
  • Much better sound — deep, accurate bass response. The active noise cancelling around-ear headphones from Mpow give you crisp, powerful sound and quiet that helps you enjoy your music better.

Product Description

Mpow (Series II) Active Noise Cancelling Headphones, 50 Hours Playtime with Hi-Fi Deep Bass, ANC Over Ear Bluetooth Headphones with Mic, Foldable Wireless Headset for Travel Work TV Cell Phone/PC : Product Description



What is the communication distance of Bluetooth?

Bluetooth has the concept of “Class.” Even with the same Bluetooth product, the strength of the radio wave differs depending on the class that is certified. That is, the communicable distance also changes.

Before you buy a Bluetooth product, make sure that you have the required class before purchasing so that it does not say, “The radio wave did not reach …”. There are three types of Classes 1-3.

Types of Bluetooth communication distance and communicable distance

One thing to keep in mind when choosing a product is that Class 1 devices do not always reach the maximum communication distance of 100m. For example, earphones with a communication distance of 20 m and microphones with a range of 50 m are also classified in Class 1. In other words, if the maximum output is “more than Class2 and within 100mW”, they are all equally classified into Class1.

As described above, even if the products are of the same class, the communication distance varies. If you want to focus on range, check the maximum output for each product.

Also, the intensity of radio waves that can be output differs depending on the country or region where the device is used. The upper limit is about 50 mW under the Japanese Radio Law, but not overseas. Besides, keep in mind that the distance may fluctuate depending on the performance of the receiving antenna and power amplifier, so it cannot be measured unconditionally.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Windows 10 PC

  • Step 1 Select Action Center at the right end of the taskbar on your computer and select [All Settings].

*The setting screen differs depending on the OS version.

  • Step 2 When the [Settings] screen opens, select [Devices].
  • Step 3 Set the headphones to the device registration mode (pairing mode).
    Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
    There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select [Bluetooth and other devices] on the computer, and select the [Add Bluetooth or other devices] button.

* If the [Bluetooth] function is [Off], set it to [On].

  • Step 5 When the [Add a device] screen is displayed, select [Bluetooth].
  • Step 6 When [〇〇 (headphone model name)] is displayed, select it.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 7 Confirm that “Connected to music” is displayed under the headphone model name, and select [Done].

This completes the pairing process with the headphones.