Qks Wireless Headphones Bluetooth 5.0 Subwoofer Sports Running Music Card Phone Computer All Inclusive Ears Can Answer Calls

  • Make sure this fits by entering your model number.
  • ★ Wireless headphones can enjoy the sound of nature in a noisy life. The sound quality is clear and away from noise, so that the call has no distance. Wired and wireless, switch at will. Comes with an audio cable, so you can listen to it without power, listen to good sound quality, MP3 card playback, plug and play.
  • ★ Wireless headphones use Bluetooth 5.0 version, CRS chip, lower latency, less power consumption, more stable signal, clear and smooth music. It only takes 2 hours to charge, it can work for up to 48 hours in Bluetooth working state, and low power consumption for 90 days. No longer worry about wearing it because of power, and enjoy life with indulgence.

Product Description

Qks Wireless Headphones Bluetooth 5.0 Subwoofer Sports Running Music Card Phone Computer All Inclusive Ears Can Answer Calls : Product Description



So how are Bluetooth and Wi-Fi different?

The first is the familiar Wi-Fi, which is good at connecting multiple devices simultaneously. It has been created as a hub that connects to the Internet. The communication speed is breakneck, and it is good at mass data communication. However, because of its considerable power consumption, it is used for stationary devices such as routers that can supply power from outlets.

Bluetooth, on the other hand, is a technology designed for one-to-one communication. Both communication speed and communication distance are weaker than Wi-Fi, but they consume less power and can be used for long-term devices such as keyboards and mice. Since these devices have a small amount of data to be communicated at one time, data delay is unlikely to occur.

How to set up pairing using iPhone

1. First, launch the iPhone settings screen and tap “Bluetooth.”
2. When Bluetooth is turned on, it will detect nearby devices, so tap it.
3. Tap the device, and if “Connected” is displayed, pairing is complete.

How to set up pairing using an Android smartphone

1. Launch the Settings screen and tap “Bluetooth.”
2. Turn on Bluetooth to detect nearby devices.
3. Since pairing is required, tap “OK” to complete the setting.

The setting method varies slightly depending on the terminal and OS version, but if you turn on Bluetooth, it will automatically detect nearby devices. The procedure is not complicated, so check it on your device.

Pair with Mac (macOS) PC

  • step 1 Apple menu select [System Preferences] from the [ ] menu on the computer
  • Step 2 Select [Bluetooth]
  • Step 3 Set the headphones to the device registration mode (pairing mode).

Check that the main unit lamp blinks blue and red alternately, or that blue blinks twice consecutively.

Hold down the “power” button or “PAIRING” button on the headphones until the lamp on the central unit blinks (about 7 seconds).
There are the following two patterns for the lamp blinking.

The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.

  • Step 4 Select the [Connect] button to the right of [〇〇 (headphone model name)] displayed in the [Device] field.

* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.

  • Step 5 Confirm that “Connected” is displayed under the headphone model name.

This completes the pairing process with the headphones.