Product Description
SONY Over Ear Best Stereo Extra Bass Portable Headphones Headset for Apple iPhone iPod / Samsung Galaxy / mp3 Player / 3.5mm Jack Plug Cell Phone (Black) … : Product Description
SONY Over Ear Best Stereo Extra Bass Portable Headphones Headset for Apple iPhone iPod / Samsung Galaxy / mp3 Player / 3.5mm Jack Plug Cell Phone (Black) … : Product Description
Bluetooth has the concept of “Class.” Even with the same Bluetooth product, the strength of the radio wave differs depending on the class that is certified. That is, the communicable distance also changes.
Before you buy a Bluetooth product, make sure that you have the required class before purchasing so that it does not say, “The radio wave did not reach …”. There are three types of Classes 1-3.
One thing to keep in mind when choosing a product is that Class 1 devices do not always reach the maximum communication distance of 100m. For example, earphones with a communication distance of 20 m and microphones with a range of 50 m are also classified in Class 1. In other words, if the maximum output is “more than Class2 and within 100mW”, they are all equally classified into Class1.
As described above, even if the products are of the same class, the communication distance varies. If you want to focus on range, check the maximum output for each product.
Also, the intensity of radio waves that can be output differs depending on the country or region where the device is used. The upper limit is about 50 mW under the Japanese Radio Law, but not overseas. Besides, keep in mind that the distance may fluctuate depending on the performance of the receiving antenna and power amplifier, so it cannot be measured unconditionally.
step 1:
Turn on Bluetooth on the player side (transmitting side).
For iPhone
* The following image is a screenshot of my iPhone.
※iPhone6S! The appearance may be slightly different depending on the version!
Step 2:
Please turn on the power of the earphone (receiving side) and set it to the pairing mode.
Pairing, i.e., connection mode! This process tends to stumble. It’s not the end after turning on the power. For most devices, the pairing mode is often set by pressing and holding the power button from power-off until the lamp flashes red and blue. Light or not, there are various and Tari a button of the playback is stopped, not the power switch, but generally is long press from the time of power supply OFF is!
Step 3:
Select the model of the earphone (reception side) on the player side (transmission side).
For iPhone
※ iPhone6S! The appearance may be slightly different depending on the version!
One point advice ☆
In many cases, the connection after the first time skips the pairing process in step 2 and connects the transmitter and receiver. If you can’t connect, try pairing again!
*The setting screen differs depending on the OS version.
The blue lamp blinks twice each time
Blue and red lights flash alternately
Refer to the instruction manual as it varies depending on the model.
* If the [Bluetooth] function is [Off], set it to [On].
* If you are asked for a passkey, enter “0000 (Zero Zero Zero Zero)”.
A passkey is sometimes called a passcode, PIN code, PIN, password, etc.
This completes the pairing process with the headphones.